13 01 2015

[FREE DUMPS] Braindump2go Helps Pass 70-412 Exam Download Free 70-412 Practice Exam Questions Study from Today Now! (16-30)

Braindump2go New Released 70-412 Exam Dumps Free Download Today! If you want to 100% pass your 70-412 Exam one time in 2015, download Braindump2go Updated 70-412 Exam Dumps Full Version Instantly!

Vendor: Microsoft
Exam Code: 70-412
Exam Name: Configuring Advanced Windows Server 2012 R2 Services

QUESTION 16
Your network contains servers that run Windows Server 2012 R2.
The network contains a large number of iSCSI storage locations and iSCSI clients.
You need to deploy a central repository that can discover and list iSCSI resources on the network automatically.
Which feature should you deploy?

A.    the Windows Standards-Based Storage Management feature
B.    the iSCSI Target Server role service
C.    the iSCSI Target Storage Provider feature
D.    the iSNS Server service feature

Answer: D
Explanation:
A. Windows Server 2012 R2 enables storage management that is comprehensive and fully scriptable, and administrators can manage it remotely. A WMI-based interface provides a single mechanism through which to manage all storage, including non-Microsoft intelligent storage subsystems and virtualized local storage (known as Storage Spaces). Additionally, management applications can use a single Windows API to manage different storage types by using standards-based protocols such as Storage Management Initiative Specification (SMI-S).
B. Targets are created in order to manage the connections between an iSCSI device and the servers that need to access it. A target defines the portals (IP addresses) that can be used to connect to the iSCSI device, as well as the security settings (if any) that the iSCSI device requires in order to authenticate the servers that are requesting access to its resources.
C. iSCSI Target Storage Provider enables applications on a server that is connected to an iSCSI target to perform volume shadow copies of data on iSCSI virtual disks. It also enables you to manage iSCSI virtual disks by using older applications that require a Virtual Disk Service (VDS) hardware provider, such as the Diskraid command.
D. The Internet Storage Name Service (iSNS) protocol is used for interaction between iSNS servers and iSNS clients. iSNS clients are computers, also known as initiators, that are attempting to discover storage devices, also known as targets, on an Ethernet network.
http://technet.microsoft.com/en-us/library/cc726015.aspx
http://technet.microsoft.com/en-us/library/cc772568.aspx

QUESTION 17
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. All servers run Windows Server 2012 R2. All domain user accounts have the Division attribute automatically populated as part of the user provisioning process.
The Support for Dynamic Access Control and Kerberos armoring policy is enabled for the domain.
You need to control access to the file shares on Server1 based on the values in the Division attribute and the Division resource property.
Which three actions should you perform in sequence?

Answer:

Explanation:
First create a claim type for the property, then create a reference resource property that points back to the claim. Finally set the classification value on the folder

QUESTION 18
Your network contains two Active Directory forests named contoso.com and fabrikam.com.
The contoso.com forest contains two domains named corp.contoso.com and contoso.com.
You establish a two-way forest trust between contoso.com and fabrikam.com. Users from the corp.contoso.com domain report that they cannot log on to client computers in the fabrikam.com domain by using their corp.contoso.com user account.
When they try to log on, they receive following error message:
"The computer you are signing into is protected by an authentication firewall. The specified account is not allowed to authenticate to the computer."
Corp.contoso.com users can log on successfully to client computers in the contoso.com domain by using their corp.contoso.com user account credentials.
You need to allow users from the corp.contoso.com domain to log on to the client computers in the fabrikam.com forest.
What should you do?

A.    Configure Windows Firewall with Advanced Security.
B.    Enable SID history.
C.    Configure forest-wide authentication.
D.    Instruct the users to log on by using a user principal name (UPN).

Answer: C
Explanation:
The forest-wide authentication setting permits unrestricted access by any users in the trusted forest to all available shared resources in any of the domains in the trusting forest.
http://technet.microsoft.com/en-us/library/cc785875(v=ws.10).aspx

QUESTION 19
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the Hyper-V server role installed.
The servers have the hardware configurations shown in the following table.

Server1 hosts five virtual machines that run Windows Server 2012 R2.
You need to move the virtual machines from Server1 to Server2.
The solution must minimize downtime.
What should you do for each virtual machine?

A.    Export the virtual machines from Server1 and import the virtual machines to Server2.
B.    Perform a live migration.
C.    Perform a quick migration.
D.    Perform a storage migration.

Answer: A
Explanation:
None of these migration options will work between different Processors ( AMD/Intel).
The only option remaining is to export and re-import the VMs

QUESTION 20
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the Hyper-V server role installed.
You plan to replicate virtual machines between Server1 and Server2.
The replication will be encrypted by using Secure Sockets Layer (SSL).
You need to request a certificate on Server1 to ensure that the virtual machine replication is encrypted.
Which two intended purposes should the certificate for Server1 contain? (Each correct answer presents part of the solution. Choose two.)

A.    Client Authentication
B.    Kernel Mode Code Signing
C.    Server Authentication
D.    IP Security end system
E.    KDC Authentication

Answer: AC
Explanation:
http://blogs.technet.com/b/virtualization/archive/2012/03/13/hyper-v-replica-certificate-requirements.aspx

QUESTION 21
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2.
Both servers have the Hyper-V server role installed. The network contains an enterprise certification authority (CA). All servers are enrolled automatically for a certificate-based on the Computer certificate template. On Server1, you have a virtual machine named VM1.
VM1 is replicated to Server2.
You need to encrypt the replication of VM1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    On Server1, modify the settings of VM1.
B.    On Server2, modify the settings of VM1.
C.    On Server2, modify the Hyper-V Settings.
D.    On Server1, modify the Hyper-V Settings.
E.    On Server1, modify the settings of the virtual switch to which VM1 is connected.
F.    On Server2, modify the settings of the virtual switch to which VM1 is connected.

Answer: AC
Explanation:
Answer is A and C, not A and F. Virtual Switch has nothing to do with this scenario based many sites I’ve visited even TechNet. And added a couple examples with Enterprise CA as well.
C. – Is Server 2, modify settings of Hyper-V=>Replica Server. then all the Encryption Reqs.
TCP-443/SSL.

QUESTION 22
Your network contains an Active Directory domain named contoso.com.
The domain contains a file server named Server1 that runs Windows Server 2012 R2.
You create a user account named User1 in the domain.
You need to ensure that User1 can use Windows Server Backup to back up Server1.
The solution must minimize the number of administrative rights assigned to User1.
What should you do?

A.    Add User1 to the Backup Operators group.
B.    Add User1 to the Power Users group.
C.    Assign User1 the Backup files and directories user right and the Restore files and directories user right.
D.    Assign User1 the Backup files and directories user right.

Answer: D
Explanation:
Backup Operators have these permissions by default:

However the question explicitly says we need to minimize administrative rights. Since the requirement is for backing up the data only–no requirement to restore or shutdown–then assigning the "Back up files and directories user right" would be the correct answer.

QUESTION 23
You have a server named Server1 that runs Windows Server 2012 R2 and is used for testing.
A developer at your company creates and installs an unsigned kernel-mode driver on Server1. The developer reports that Server1 will no longer start.
You need to ensure that the developer can test the new driver.
The solution must minimize the amount of data loss.
Which Advanced Boot Option should you select?

A.    Disable Driver Signature Enforcement
B.    Disable automatic restart on system failure
C.    Last Know Good Configuration (advanced)
D.    Repair Your Computer

Answer: A
Explanation:
A. By default, 64-bit versions of Windows Vista and later versions of Windows will load a kernel- mode driver only if the kernel can verify the driver signature. However, this default behavior can be disabled to facilitate early driver development and non-automated testing.
B. specifies that Windows automatically restarts your computer when a failure occurs
C. Developer would not be able to test the driver as needed
D. Removes or repairs critical windows files, Developer would not be able to test the driver as needed and some file loss
http://technet.microsoft.com/en-us/library/jj134246.aspx
http://msdn.microsoft.com/en-us/library/windows/hardware/ff547565(v=vs.85).aspx

QUESTION 24
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
You have a Dynamic Access Control policy named Policy1.
You create a new Central Access Rule named Rule1.
You need to add Rule1 to Policy1.
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
http://technet.microsoft.com/en-us/library/hh846167.aspx

QUESTION 25
Your network contains an Active Directory domain named contoso.com.
The domain contains two member servers named Server1 and Server2.
All servers run Windows Server 2012 R2. Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.
You add two additional nodes in Cluster1.
You have a folder named Folder1 on Server1 that hosts application data.
Folder1 is a folder target in a Distributed File System (DFS) namespace.
You need to provide highly available access to Folder1.
The solution must support DFS Replication to Folder1.
What should you configure?

A.    Affinity-None
B.    Affinity-Single
C.    The cluster quorum settings
D.    The failover settings
E.    A file server for general use
F.    The Handling priority
G.    The host priority
H.    Live migration
I.    The possible owner
J.    The preferred owner
K.    Quick migration
L.    The Scale-Out File Server

Answer: E
Explanation:

QUESTION 26
Your network contains an Active Directory domain named contoso.com.
The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Network Load Balancing (NLB) feature installed.
The servers are configured as nodes in an NLB cluster named Cluster1.
Port rules are configured for all clustered applications.
You need to ensure that Server2 handles all client requests to the cluster that are NOT covered by a port rule.
What should you configure?

Answer: G
Explanation:
http://technet.microsoft.com/en-us/library/bb742455.aspx

QUESTION 27
Hotspot Question
Your network contains two Web servers named Server1 and Server2.
Both servers run Windows Server 2012 R2.
Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster.
The NLB cluster contains an application named App1 that is accessed by using the name
appl.contoso.com.
The NLB cluster has the port rules configured as shown in the exhibit. (Click the Exhibit button.)

To answer, complete each statement according to the information presented in the exhibit.
Each correct selection is worth one point.

Answer:

QUESTION 28
Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. The functional level of the forest is Windows Server 2003.
You have a domain outside the forest named adatum.com.
You need to configure an access solution to meet the following requirements:
– Users in adatum.com must be able to access resources in contoso.com.
– Users in adatum.com must be prevented from accessing resources in fabrikam.com.
– Users in both contoso.com and fabrikam.com must be prevented from accessing resources in adatum.com.
What should you create?

A.    a one-way realm trust from contoso.com to adatum.com
B.    a one-way realm trust from adatum.com to contoso.com
C.    a one-way external trust from contoso.com to adatum.com
D.    a one-way external trust from adatum.com to contoso.com

Answer: C
Explanation:
domain names were changed, so understand the question well
You need to make trust relationship where domain contoso.com trusts adatum.com.
http://technet.microsoft.com/en-us/library/cc728024(v=ws.10).aspx

QUESTION 29
Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office.
All domain controllers run Windows Server 2012 R2.
The domain contains two domain controllers.
DC1 hosts an Active Directory- integrated zone for contoso.com.
You add the DNS Server server role to DC2.
You discover that the contoso.com DNS zone fails to replicate to DC2.
You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2.
You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication.
Which tool should you use?

A.    Dnscmd
B.    Dnslint
C.    Repadmin
D.    Ntdsutil
E.    DNS Manager
F.    Active Directory Sites and Services
G.    Active Directory Domains and Trusts
H.    Active Directory Users and Computers

Answer: F
Explanation:
http://technet.microsoft.com/en-us/library/cc739941(v=ws.10).aspx
If you see question about AD Replication, First preference is AD sites and services, then Repadmin and then DNSLINT.

QUESTION 30
Your network contains an Active Directory forest named contoso.com.
The forest contains four domains. All servers run Windows Server 2012 R2.
Each domain has a user named User1.
You have a file server named Server1 that is used to synchronize user folders by using the
Work Folders role service.
Server1 has a work folder named Sync1.
You need to ensure that each user has a separate folder in Sync1.
What should you do?

A.    From Windows Explorer, modify the Sharing properties of Sync1.
B.    Run the Set-SyncServerSetting cmdlet.
C.    From File and Storage Services in Server Manager, modify the properties of Sync1.
D.    Run the Set-SyncShare cmdlet.

Answer: D
Explanation:
http://technet.microsoft.com/en-US/library/dn296649.aspx
PS C:\> Set-SyncShare Share01 -User "ContosoGroup"

Braindump2go Provides You the Latest 2015 70-412 Questions and Answers ALL From Official Microsoft Exam Center, 346 questions in all, 2015 Exam 70-412 100% Pass Guaranteed By Braindump2go!

http://www.braindump2go.com/70-412.html

70-412 Exam Questions, 70-412 PDF, 70-412 Practice Tests, 70-412 Study Materials, 70-412 VCE, Microsoft 70-412 exam dumps

Latest Braindump2go Microsoft 70-411 Certification PDF With 100% Guarantee Pass (166-180) [NEW DUMPS] New Published Microsoft 70-412 Exam Dumps Free Download from Braindump2go! (31-45)

Comments are currently closed.