30 01 2015

All Latest Updated Questions and Answers in Braindump2go 70-417 Exam Dumps will not take you a lot of time to comprehend and you can easily cover up the entire Microsoft 70-417 syllabus for your examination.Download Braindump2go Free 70-417 Sample Questions Now, Pass 70-417 Exam in advance!

Vendor: Microsoft
Exam Code: 70-417
Exam Name: Upgrading Your Skills to MCSA Windows Server 2012 R2 Exam

QUESTION 131
Your network contains an Active Directory forest named contoso.com.
All servers run Windows Server 2012 R2.
You need to create a custom Active Directory Application partition.
Which tool should you use?

A.    Netdom
B.    Ntdsutil
C.    Dsmod
D.    Dsamain

Answer: B
Explanation:
* To create or delete an application directory partition Open Command Prompt.
Type:ntdsutil
At the ntdsutil command prompt, type:domain management
At the domain management command prompt, type:connection At the server connections command prompt, type:connect to server ServerName At the server connections command prompt, type:quit
At the domain management command prompt, do one of the following:
* partition management
Manages directory partitions for Active Directory Domain Services (AD DS) or Active Directory Lightweight Directory Services (AD LDS).
This is a subcommand of Ntdsutil and Dsmgmt. Ntdsutil and Dsmgmt are command-line tools that are built into Windows Server 2008 and Windows Server 2008 R2.
/ partition management create nc %s1 %s2
Creates the application directory partition with distinguished name %s1, on the Active Directory domain controller or AD LDS instance with full DNS name %s2. If you specify "NULL" for %s2, this command uses the currently connected Active Directory domain controller. Use this command only with AD DS. For AD LDS, use create nc %s1 %s2 %s3.
Note:
* An application directory partition is a directory partition that is replicated only to specific domain controllers. A domain controller that participates in the replication of a particular application directory partition hosts a replica of that partition.

QUESTION 132
Hotspot Question
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains two Active Directory sites named Site1 and Site2.
You plan to deploy a read-only domain controller (RODC) named DC10 to Site2.
You precreate the DC10 domain controller account by using Active Directory Users and Computers.
You need to identify which domain controller will be used for initial replication during the promotion of the RODC.
Which tab should you use to identify the domain controller? To answer, select the appropriate tab in the answer area.

Answer:

QUESTION 133
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
You create an Active Directory snapshot of DC1 each day.
You need to view the contents of an Active Directory snapshot from two days ago.
What should you do first?

A.    Stop the Active Directory Domain Services (AD DS) service.
B.    Run the ntdsutil.exe command.
C.    Run the dsamain.exe command.
D.    Start the Volume Shadow Copy Service (VSS).

Answer: B
Explanation:
Mounting an Active Directory snapshot
Before connecting to the snapshot we need to mount it. By looking at the results of the List All command in step #8 above, identify the snapshot that you wish to mount, and note the number next to it.
In order to mount an Active Directory snapshot follow these steps:
Log on as a member of the Domain Admins group to one of your Windows Server 2008 Domain Controllers.
Open a Command Prompt window by clicking on the CMD shortcut in the Start menu, or by typing CMD and pressing Enter in the Run or Quick Search parts of the Start menu. Note: You must run NTDSUTIL from an elevated command prompt. To open an elevated command prompt, click Start, right-click Command Prompt, and then click Run as administrator.
In the CMD window, type the following command:
ntdsutil
In the CMD window, type the following command:
snapshot
To view all available snapshots, in the CMD window, type the following command:
list all The result should look like this:
snapshot: List All
1: 2008/10/25:03:14 {ec53ad62-8312-426f-8ad4-d47768351c9a}
2: C: {15c6f880-cc5c-483b-86cf-8dc2d3449348}
In this example we only have one snapshot available, one from 2008/10/25 at 03:14AM (yes, I write articles at this time…). We’ll mount this one.
In the CMD window, type the following command:
mount 2
The result should look like this:
snapshot: mount 2
Snapshot {15c6f880-cc5c-483b-86cf-8dc2d3449348} mounted as
C:’$SNAP_200810250314_VOLUMEC$’
Next, you can leave the NTDSUTIL running, or you can quit by typing quit 2 times. Note: Like the above command, the mounting process can also be run in one line.
However, note that
NTDSUTIL requires that the "list all" command be run in the same session that you mount the snapshot. So in order to mount the snapshot with a one-liner, you will need to run "list all" first.
ntdsutil snapshot "list all" "mount 2" quit quit
Note: You do not need to quit from the NTDSUTIL command, you can keep it open assuming that you’ll probably want to unmount the snapshot right after working with it.

QUESTION 134
You have a server named Server1 that runs Windows Server 2012 R2.
You need to configure Server1 to create an entry in an event log when the processor usage exceeds 60 percent.
Which type of data collector should you create?

A.    an event trace data collector
B.    a performance counter data collector
C.    a performance counter alert
D.    a configuration data collector

Answer: C

QUESTION 135
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. Cluster1 hosts 10 virtual machines. All of the virtual machines run Windows Server 2012 R2 and are members of the domain.
You need to ensure that the first time a service named Service1 fails on a virtual machine, the virtual machine is moved to a different node.
You configure Service1 to be monitored from Failover Cluster Manager.
What should you configure on the virtual machine?

A.    From the Recovery settings of Service1, set the First failure recovery action to Restart the Service.
B.    From the Recovery settings of Service1, set the First failure recovery action to Take No Action.
C.    From the General settings, modify the Startup type.
D.    From the General settings, modify the Service status.

Answer: B
Explanation:
Configure the virtual machine to take no action through Hyper-V if the physical computer shuts down by modifying the Automatic Stop Action setting to None.
Virtual machine state must be managed through the Failover Clustering feature.
http://technet.microsoft.com/en-us/library/cc742396.aspx
http://windowsitpro.com/windows-server-2012/enable-windows-server-2012-failover-cluster-hyper-v-vmmonitoring

QUESTION 136
Your network contains two servers named Server1 and Server2. Both servers run Windows Server 2012 R2, On Server1, you create a Data Collector Set (DCS) named Data1. You need to export Data1 to Server2. What should you do first?

A.    Right-click Data1 and click Data Manager…
B.    Right-click Data1 and click Save template…
C.    Right-click Data1 and click Properties.
D.    Right-click Data1 and click Export list…

Answer: B
Explanation:
To export a Data Collector Set you create as a template for use on other computers, open Windows Performance Monitor, expand Data Collector Sets, right-click the Data Collector Set you want to export, and click Save Template.
Select a directory in which to store the XML file and click Save .
http://technet.microsoft.com/en-us/library/cc766318.aspx

QUESTION 137
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2.
Server1 has the Remote Desktop Session Host role service installed.
The computer account of Server1 resides in an organizational unit (OU) named OU1.
You create and link a Group Policy object (GPO) named GPO1 to OU1.
GPO1 is configured as shown in the exhibit. (Click the Exhibit button.)

You need to prevent GPO1 from Applying to your user account when you log on to Server1. GPO1 must Apply to every other user who logs on to Server1.
What should you configure?

A.    WMI Filtering
B.    Item-level Targeting
C.    Block Inheritance
D.    Security Filtering

Answer: D
Explanation:
Security filtering is a way of refining which users and computers will receive and apply the settings in a Group Policy object (GPO). Using security filtering, you can specify that only certain security principals within a container where the GPO is linked apply the GPO. Security group filtering determines whether the GPO as a whole applies to groups, users, or computers; it cannot be used selectively on different settings within a GPO.

QUESTION 138
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
All client computers run Windows 8 Group Policy objects (GPOs) are linked to the domain as shown in the exhibit. (Click the Exhibit button.)

GPO2 contains computer configurations only and GPO3 contains user configurations only.
You need to configure the GPOs to meet the following requirements:
– Ensure that GPO2 only Applies to the computer accounts in OU2 that have more than one processor.
– Ensure that GPO3 only Applies to the user accounts in OU3 that are members of a security group named SecureUsers.
Which setting should you configure in each GPO? To answer, drag the appropriate setting to the correct GPO. Each setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

QUESTION 139
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2. An organizational unit (OU) named OU1 contains 200 client computers that run Windows 8 Enterprise.
A Group Policy object (GPO) named GPO1 is linked to OU1.
You make a change to GPO1.
You need to force all of the computers in OU1 to refresh their Group Policy settings immediately. The solution must minimize administrative effort.
Which tool should you use?

A.    The Set-AdComputercmdlet
B.    Group Policy Object Editor
C.    Active Directory Users and Computers
D.    Group Policy Management Console (GPMC)

Answer: D
Explanation:
In the previous versions of Windows, this was accomplished by having the user run GPUpdate.exe on their computer. Starting with Windows Server?2012 and Windows?8, you can now remotely refresh Group Policy settings for all computers in an OU from one central location through the Group Policy Management Console (GPMC). Or you can use the Invoke-GPUpdate cmdlet to refresh Group Policy for a set of computers, not limited to the OU structure, for example, if the computers are located in the default computers container.
Note: Group Policy Management Console (GPMC) is a scriptable Microsoft Management Console (MMC) snap-in, providing a single administrative tool for managing Group Policy across the enterprise. GPMC is the standard tool for managing Group Policy.
Incorrect:
Not B: Secedit configures and analyzes system security by comparing your current configuration to at least one template.
Reference: Force a Remote Group Policy Refresh (GPUpdate)

QUESTION 140
Your network contains an Active Directory domain named contoso.com. Network Access Protection (NAP) is deployed to the domain.
You need to create NAP event trace log files on a client computer.
What should you run?

A.    Logman
B.    Tracert
C.    Register-EngineEvent
D.    Register-ObjectEvent

Answer: A
Explanation:
Register-ObjectEvent: Monitor events generated from .Net Framework Object. Register-EngineEvent: Subscribes to events that are generated by the Windows PowerShell engine and by the New-Event cmdlet.
http://technet.microsoft.com/en-us/library/hh849967.aspx
tracert: Trace IP route
logman: Manages and schedules performance counter and event trace log collections on a local and remote systems.
http://technet.microsoft.com/en-us/library/bb490956.aspx

Braindump2go Promise All 70-417 Questions and Answers are the Latest Updated,we aim to provide latest and guaranteed questions for all certifications.You just need to be braved in trying then we will help you arrange all left things! 100% Pass All Exams you want Or Full Money Back! Do yo want to have a try on passing 70-417?

http://www.braindump2go.com/70-417.html

70-417 Exam Questions, 70-417 PDF, 70-417 Practice Tests, 70-417 Study Materials, 70-417 VCE, Microsoft 70-417 Exam Dumps

[FREE UPDATED] Microsoft 70-417 Free Braindumps – Pass 70-417 Exam With Braindump2go Free Microsoft 70-417 Q&As (121-130) [NEW UPDATED QUESTIONS] Braindump2go Promise You Pass New Exam 70-417 One Time Just Using 70-417 Latest Released Exam Questions (151-160)