23 04 2014

QUESTION 61
Drag and Drop Question

Answer:

QUESTION 62
Hotspot Questions

Select two options which are security Issues which need to be modified before RouterA is used? (Choose two.)

A.    unencrypted weak password is configured to protect privilege mode
B.    inappropriate wording in banner message
C.    the virtual terminal lines have a weak password configured
D.    virtual terminal lines have a password, but it will not be used
E.    configuration supports un-secure web server access

Answer: BD
Explanation:
(This answer can be done by simulation only, don’t know user name password and banner message etc)

QUESTION 63
Hotspot Questions

Select three options which are security issues with the current configuration of SwitchA . (Choose three.)

A.    privilege mode is protected with an unencrypted password
B.    inappropriate wording in banner message
C.    virtual terminal lines are protected only by a password requirement
D.    both the username and password are weak
E.    telnet connections can be used to remotely manage the switch
F.    cisco user will be granted privilege level 15 by default

Answer: ABD
Explanation:
(This answer can be done by simulation only, don’t know user name password and banner message etc)

QUESTION 64
Hotspot Questions

Which two of the following are true regarding the configuration of RouterA? (Choose two.)

A.    at least 5 simultaneous remote connections are possible
B.    only telnet protocol connections to RouterA are supported
C.    remote connections to RouterA using telnet will succeed
D.    console line connections will nevertime out due to inactivity
E.    since DHCP is not used on FaO/1 there is not a need to use the NAT protocol

Answer: AC
Explanation:
The IP address can accommodate 5 hosts at least, telnet can be accessed on the router

QUESTION 65
Hotspot Questions

Which of the following is true regarding the configuration of SwitchA?

A.    only 5 simultaneous remote connections are possible
B.    remote connections using ssh will require a username and password
C.    only connections from the local network will be possible
D.    console access to SwitchA requires a password

Answer: B
Explanation:
Ssh login requires a user name and password always while other conditions may or may not be true.

QUESTION 66
Lab Questions

Answer: 192.168.8.15
Explanation:
The IP address assigned to FA0/1 is 192.168.8.9/29, making 192.168.8.15 the broadcast address.

Answer: 16 Kbit/sec
Explanation:
Use the “show interface s0/0” to see the bandwidth set at 16 Kbit/sec.

Answer: 6
Explanation:
This is a /29 address, so there are 6 usable IP’s on this subnet.

Answer: Router1(conf)# interface fa0/1
Router1(conf0if)# no shutdown
Explanation:
Do a “show ip int brief” and you will see that Fa0/1 has an IP address assigned, but
it is shut down.

QUESTION 67
An administrator must assign static IP addresses to the servers in a network. For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP properties box for the sales server?

A.    IP address: 192.168.20.14
Subnet Mask: 255.255.255.248
Default Gateway: 192.168.20.9
B.    IP address: 192.168.20.254
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.20.1
C.    IP address: 192.168.20.30
Subnet Mask: 255.255.255.248
Default Gateway: 192.168.20.25
D.    IP address: 192.168.20.30
Subnet Mask: 255.255.255.240
Default Gateway: 192.168.20.17
E.    IP address: 192.168.20.30
Subnet Mask: 255.255.255.240
Default Gateway: 192.168.20.25

Answer: C

QUESTION 68
What is the default administrative distance of the OSPF routing protocol?

A.    90
B.    100
C.    110
D.    120
E.    130
F.    170

Answer: C

QUESTION 69
What is the subnet address for the IP address 172.19.20.23/28?

A.    172.19.20.0
B.    172.19.20.15
C.    172.19.20.16
D.    172.19.20.20
E.    172.19.20.32

Answer: C

QUESTION 70
Refer to the exhibit. The two connected ports on the switch are not turning orange or green. What would be the most effective steps to troubleshoot this physical layer problem? (Choose three.)

A.    Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B.    Ensure that cables A and B are straight-through cables.
C.    Ensure cable A is plugged into a trunk port.
D.    Ensure the switch has power.
E.    Reboot all of the devices.
F.    Reseat all cables.

Answer: BDF

If you want to pass the Cisco 100-101 Exam sucessfully, recommend to read latest Cisco 100-101 Dump full version.

100-101 Answers, 100-101 Questions, Cisco 100-101 Dumps, Cisco 100-101 Exam

2014 Cisco 100-101 Exam Dump(51-60) 2014 Cisco 100-101 Exam Dump(71-80)