19 07 2016

2016/07 Cisco Official News!!!

CCNP Collaboration 300-080 CTCOLLAB: Troubleshooting Cisco IP Telephony & Video v1.0 Exam Questions and Answers New Updated Today!

Instant Download Free 300-080 PDF & 300-080 VCE from Braindump2go.com.

100% Exam Pass Guaranteed!

NEW QUESTION 31 – NEW QUESTION 40:

1.|2016 Latest Cisco 300-080 CTCOLLAB PDF & 300-080 CTCOLLAB VCE 196Q&As Dumps Instant Download:http://www.braindump2go.com/300-080.html
2.|2016 New Cisco 300-080 CTCOLLAB Exam Questions PDF:https://drive.google.com/folderview?id=0B272WrTALRHcRVZjNGRLeDJsNk0&usp=sharing

QUESTION 31
How does an IP Phone react upon initilization, if there is no CTL and ITL files present on the device?

A.    The phone downloads only the files that are signed to that device.
B.    The phone blindly trusts the next series of downloaded files.
C.    The file matches the signature against the files on TFTP.
D.    The phone displays the message, Unprovisioned.

Answer: B

QUESTION 32
Which two issues can prevent an IP Phone from receiving an IP address via DHCP? (Choose two.)

A.    The DHCP server is not on the same VLAN as the phone.
B.    The DHCP scope’s leases are exhausted.
C.    DHCP Option 150 is incorrect.
D.    The TFTP server is not reachable.
E.    The DHCP scope is not defined for the subnet of the phone.

Answer: AB

QUESTION 33
What is a common reason that an IP Phone cannot get its configuration from Cisco Unified Communications Manager after it obtains the correct IP address information?

A.    The DHCP scope is exhausted.
B.    The DHCP server is not reachable.
C.    The DHCP scope is on the wrong subnet.
D.    The DHCP scope has the incorrect Option 150 or 66 defined.

Answer: D

QUESTION 34
After an IP Phone gets IP address information from DHCP, what is the next step in the initialization process?

A.    CTL and ITL files are downloaded.
B.    The phone requests its VLAN information.
C.    The DHCP offer is sent from the phone
D.    The TFTP server is contacted for configuration information.
E.    Nothing else is required, the phone is operational at this stage

Answer: D

QUESTION 35
Refer to topology and Exhibits below:
 
 
 

 
From the perspective of the Cisco Unified Communications Manager, what is the status of the MGCP gateway?

A.    registered
B.    unknown
C.    registering
D.    initializing

Answer: C

QUESTION 36
Refer to topology and Exhibits below:
 

 
Which command can be used to obtain the status of an MGCP gateway from the IOS device, as shown in the given output?

A.    show mgcp registration
B.    show mgcp-gw
C.    show mgcp connection
D.    show ccm-manager

Answer: D

QUESTION 37
Refer to topology and Exhibits below:
 

 
What is the reason that this MGCP gateway is not registered with Cisco Unified Communications Manager?

A.    The primary server address is incorrect.
B.    The MGCP domain name is incorrect on either the Cisco Unified Communications Manager or the router.
C.    Backhaul/Redundant link port is incorrect
D.    This MGCP gateway is not down; it is operational.

Answer: B

QUESTION 38
Refer to topology and Exhibits below:
 

 
After making a change to a manually configured MGCP gateway, what step should you take to ensure that the gateway accepts the changes and be operational?

A.    Issue the commands no MGCP, then MGCP.
B.    Issue the commands no SCCP. then SCCP.
C.    Issue the commands Shut, then no shut
D.    Issue the commands no CCM. then CCM.

Answer: A

QUESTION 39
Refer to topology and Exhibits below:
 

 
 
 
 
 
 
A call from HQ Phone 1 with the extension of 2001 is dialing a SX20 that is registered to the VCS in BackBone (not shown). Determine if the call fails and if so, what are the two causes? (Choose two.)

A.    The call succeeds
B.    The call fails
C.    There are no issues, so the call succeeds.
D.    The SIP port is incorrect on the Cisco Unified Communications Manager SIP trunk.
E.    The Local Zone Match Rule state is disabled.
F.    Rule name UCM2 is set to stop on Match

Answer: BF

QUESTION 40
Refer to topology and Exhibits below:
 
 
 
 
 
 
 
 
A call from a SX20 in the BackBone (not shown) with a URI extension is dialing a HQ Ph 1 that is registered to the HQ CUCM. Determine if the call fails and if so, what are the two causes? (Choose two).

A.    The call succeeds.
B.    The call fails.
C.    There are no issues, so the call succeeds.
D.    The SIP port is incorrect on the Cisco Unified Communications Manager CUCM SIP trunk.
E.    The Local Zone Match Rule state is disabled.
F.    Rule name UCM2 is set to stop on Match

Answer: AC

!!!RECOMMEND!!!

2016/07 Latest Braindump2go Cisco 300-080 Exam PDF and VCE 196q Dumps Instant Download:

http://www.braindump2go.com/300-080.html [100% Exam Pass Guaranteed!]

2016/07 Latest Braindump2go Cisco 300-080 Exam Questions PDF:

https://drive.google.com/folderview?id=0B272WrTALRHcRVZjNGRLeDJsNk0&usp=sharing

300-080 Dumps, 300-080 Dumps PDF, 300-080 Dumps VCE, 300-080 Exam Dumps, 300-080 Exam Questions, 300-080 PDF, 300-080 PDF Dumps, 300-080 VCE, 300-080 VCE Dumps, Braindump2go

[2016/07 NEW]Download Braindump2go 300-080 Practice Exams for Free[NQ21-NQ30] [2016/07 NEW]100% Real 300-080 Exam Preparation Free Download in Braindump2go[NQ41-NQ50]