25 07 2019
[July-2019-New]Real Exam Questions-Braindump2go 70-735 Dumps VCE and PDF Dumps 116Q Download
July/2019 Braindump2go New 70-735 Exam Dumps with PDF and VCE New Updated! Following are some new 70-735 Exam Questions:
1.|2019 Latest Braindump2go 70-735 Exam Dumps (PDF & VCE) Instamnt Download:
https://www.braindump2go.com/70-735.html
2.|2019 Latest Braindump2go 70-735 Exam Questions & Answers Instamnt Download:
https://drive.google.com/drive/folders/0B75b5xYLjSSNZDBFeXJYTkxyQTQ?usp=sharing
Real Question
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of Windows 10.
You copy the installation media for Windows 10 to Computer1.
You need to add drivers to the Windows 10 image.
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: A
Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-and-remove-drivers-to-an-offline-windows-image
Real Question
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You create the working directories for the customization of a Windows Preinstallation Environment (Windows PE) image.
You need to modify the regional setting used in windows PE.
What should you do first?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: D
Real Question
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question. You have an image of Windows 10 for a new desktop computer model.
You plan to deploy the computer to two regions.
You need to add a language interface pack to the image.
Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: C
Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-and-remove-language-packs-offline-using-dism
Real Question
You deploy Windows 10 and Microsoft Office 2016 to a test computer.
You plan to capture an image of the test computer, and then to deploy the image to computers that will be sold to your customers.
You need to ensure that when a customer first starts an Office application, the customer is prompted to try, buy, or activate Office.
What should you run on the test computer before the capture?
A. officedeploymenttool.exe
B. setup.exe /admin
C. oemsetup.cmd Mode=OEM
D. setup.exe /configure
Answer: D
Real Question
You have a generalized image of the 64-bit version of Wmdows 10. The image is resealed to the Out-of-Box-Experience (OOBE).
You need to ensure that when the image is deployed to a computer, the computer starts in audit mode.
What should you do?
A. Create an answer file, and then copy the answer file to the image.
B. When the computer starts, press SHIFT+F10, and then run sysprep.exe /audit.
C. Create a provisioning package, and then copy the provisioning package to the image.
D. When the computer starts, press SHIFT+F10, and then run imagex.exe.
Answer: A
Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/boot-windowsto-audit-mode-or-oobe#bkmk_4
Real Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are configuring a reference computer for a new UEFI-based deployment image of the 64-bit version of Windows 10.
The reference computer has two physical hard disk drives.
You need to configure a partition on Disk 0 to support a recovery partition.
Solution: You create an EFI system partition of 150 MB that uses the NTFS file system.
Does this meet the goal?
A. Yes
B. No
Answer: B
Real Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You mount an image of Windows 10.
You download 10 Windows 10 update packages to separate folders.
Some of the update packages contain dependencies to the other update packages.
You are unaware of the specific dependencies.
You need to add all the update packages to the image in the correct order.
Solution: You run dism.exe /Add-Package once and specify the/PackagePath parameter for each folder that contains the updates.
Does this meet the goal?
A. Yes
B. No
Answer: B
Real Question
You have a computer named Computer1 that runs Windows 10.
On Computer1, you have a DVD that contains the installation source files of Windows 10 Pro.
You open Windows System Image Manager as shown in the exhibit.
You need to configure the answer file for Windows 10 by using Windows System Image Manager (Windows SIM).
What should you do first?
A. Copy the installation files for Windows 10 to a hard disk.
B. Create a catalog file (.clg).
C. Select a distribution share.
D. Select an image of Windows 10.
Answer: A
Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/system-builderdeployment-of-windows-10-for-desktop-editions
Real Question
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an image of Windows 10 that you plan to deploy to a new computer.
You need to apply a Universal Windows Platform (UWP) app to the image.
Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: D
Explanation:
https://technet.microsoft.com/en-us/library/dn387084.aspx
Real Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are configuring a reference computer for a new UEFI-based deployment image of the 64-bit version of Windows 10. The reference computer has two physical hard disk drives.
You need to configure a partition on Disk 0 to support a recovery partition.
Solution: You create an MSR partition of 120 MB that uses the ReFS file system.
Does this meet the goal?
A. Yes
B. No
Answer: B
Real Question
You deploy an image of Windows 10 to a computer, and then you install Microsoft Office 2016 on the computer.
You plan to deliver the computer to a customer.
You need to ensure that the computer meets the terms of the OEM license agreement.
The solution must ensure that the customer can customize the Windows operating system, create user accounts, name the computer, and perform other tasks.
Which sysprep.exe parameter should you specify?
A. /mode
B. /generalize
C. /oudit
D. /oobe
Answer: D
!!!RECOMMEND!!!
1.|2019 Latest Braindump2go 70-735 Exam Dumps (PDF & VCE) Instamnt Download:
https://www.braindump2go.com/70-735.html
2.|2019 Latest Braindump2go 70-735 Study Guide Video Instant Download:
[New Exams!]Real Exam Questions-Braindump2go DP-201 Exam Dumps VCE 75Q Download [July-2019-New]Exam Pass 100%!Braindump2go 70-735 Dumps 116Q Instant Download
Comments are currently closed.